Installing the dashboard trim

NOTE: TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person.

Insert the dashboard trim in the vehicle and position on the support.
Maneuver the corresponding wiring harnesses and connect and lock the connectors.

Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

Dashboard to support
Screw	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Connect the connector (1) to the light operating unit and lock it.

Courtesy of BMW OF NORTH AMERICA, INC.
Attach the wiring harness (2) to the holders.
Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

Dashboard to support
Screw	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

Dashboard to support
Screw	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (1) on the underside of the glove box.

TIGHTENING TORQUES SPECIFICATION

Dashboard to support
Screw	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Connect all plug connections and cable clips (arrows) behind the glove compartment.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

Dashboard to support
Screw	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

Dashboard to support
Screw	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the right and left side.

Tighten down screw (2).

TIGHTENING TORQUES SPECIFICATION

Dashboard to support
Screw	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.