Install tension strut on shock tower
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Install the tension strut (3) on the shock tower.
- Tighten down screws (1)
.TIGHTENING TORQUE SPECIFICATIONS
Tension strut on firewall M10x25 screw Tightening torque 56 Nm - Replace screws (2)
.
Parts: Screws
- Tighten down screws (2)
.TIGHTENING TORQUE SPECIFICATIONS
Tension strut to shock tower screw Replace screws. Joining torque 56 Nm Angle of rotation 90°
Follow-up work
- Refer to INSTALLING WINDSHIELD PANEL COVER .
- Refer to INSTALLING LEFT AND RIGHT WIPER ARM .
- Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .
- Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .