1113 ENGINE OIL PAN (230i, 230i xDrive)
1113 TIGHTENING TORQUE OVERVIEW
| Oil deflector to crankcase | ||
| M8 x 35 Replace screws. |
Tightening torque | 15 Nm |
| Angle of rotation | 45° | |
| Oil drain plug | ||
| M12x16 Replace the sealing ring. |
Tightening torque | 25 Nm |
| Oil drain plug on oil sump | ||
| M12 x 1.5 Replace the sealing ring. |
Tightening torque | 20 Nm |
| Oil sump to crankcase | ||
| M8x30 | Tightening torque | 24 Nm |
| M8x110 | Tightening torque | 24 Nm |
| Transmission to oil pan | ||
| M8 x 50 | Tightening torque | 19 Nm |