Installing the front door trim panel

NOTE: RISK OF DAMAGE
Damage of high-quality surfaces.
Plastic wedges can damage high-quality surfaces.

Check the clips (1) for damage and replace where required.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
Press the inner door handle in the Closed direction.
Feed in the Bowden cable (2) for the inner door handle and clip in with the detent (1).
Connect connectors (3) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in the door trim panel (1) from above over the operating rod (3) and clip in with the detents (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Clip in door trim panel (1) at the marked positions.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATION

Door trim panel
Oval-head screw	Tightening torque	3.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Position the cover (1) of the door opener and clip it in.

Courtesy of BMW OF NORTH AMERICA, INC.