LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2022
>>
230i
>>
Repair and Diagnosis
>>
Brakes
>>
Mechanical - Hydraulic
>>
Brakes -- Repair (G42)
>>
34 31 Brake Master Cylinder
>>
34 31 181 Replacing expansion tank for hydraulic brake actuation
>>
Removing the expansion tank
Removing the expansion tank
Preliminary work
Refer to
REMOVING THE COVER OF THE ENGINE COMPARTMENT AT THE REAR LEFT
.
Precondition
Brake fluid has been drawn off.
Disconnect plug connection (1).
Detach the cable from the holder (2).
Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screw (1).
Remove expansion tank upwards.
Courtesy of BMW OF NORTH AMERICA, INC.