Remove front cross connection

NOTE: RISK OF DAMAGE
Mechanical effects.
Paint damage.

Mask those working areas at risk with yellow plastic adhesive tape.
Remove and install heavy or bulky components with the aid of another person/other persons.

Preliminary work

Refer to REMOVING THE FRONT HOOD SEAL .
Refer to REMOVING THE COVER FOR THE CENTER ENGINE COMPARTMENT .
Refer to PARTIALLY RELEASING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
Refer to PARTIALLY REMOVING TEMPERATURE SENSOR .
Refer to REMOVING FRONT BUMPER COVER .
Refer to REMOVING TOP AUTOMATIC AIR FLAP CONTROL .
Refer to REMOVING UPPER CROSS CONNECTION .

Loosen the expanding rivet (1).
Loosen screws (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1).
Guide out the front cross connection (2) upwards and remove.

Courtesy of BMW OF NORTH AMERICA, INC.