Install rear trim panel

Precondition 

The rear seat is folded down.

• Check clips (1) for damage and replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect all plug connections of the wiring harness to the rear side trim panel (1) and lock it.
• Position the rear side trim panel (1) and clip it in at the clamps (3).
• Clip in the rear side trim panel (1) at the clips (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE SEAT BELT FINISHER STRIP .
• Refer to INSTALLING THE INNER DOOR SILL COVER STRIP .
• Refer to INSTALLING BACKREST SIDE SECTION .
• Refer to INSTALLING THE REAR SEAT .