Lower headlining (with sliding/tilting sunroof) on the left or right
NOTE:
RISK OF DAMAGE
Fold the headlining.
Damage to the headlining. If necessary, the headlining must be replaced.
Fold the headlining.
Damage to the headlining. If necessary, the headlining must be replaced.
- Carry out tasks with a second person to assist.
- Support the headlining at the front and back.
Preliminary work
- Refer to REMOVING REAR SEAT BENCH .
- Refer to REMOVING ARMREST SIDE SECTION .
- Refer to REMOVING THE INNER DOOR SILL COVER STRIP .
- Refer to REMOVING THE SEAT BELT FINISHER STRIP .
- Refer to REMOVING REAR SIDE TRIM PANEL .
- Refer to TRIM OF THE 3RD BRAKE LIGHT .
- Refer to REMOVING THE B-PILLAR TRIM PANEL .
- Refer to REMOVING C-PILLAR TRIM PANEL .
- Refer to REMOVING INTERIOR ROOF LIGHT .
- Refer to REMOVING THE A-PILLAR TRIM PANEL .
- Refer to REMOVING SUN VISOR .
- Refer to REMOVING THE COUNTER SUPPORT FOR THE SUN VISOR .
- Refer to REMOVING THE FRONT VANITY MIRROR LIGHT .
- Refer to REMOVING THE HANDS-FREE MICROPHONE LEFT AND RIGHT .
- Refer to REMOVING THE ROOF FUNCTION CENTER (FZD) .
- Refer to REMOVING THE COVERS FOR THE INTERIOR MIRROR .
- Release screws (1)
.
RB51 10355
- Loosen screw (1) .
- Unclip the headlining on the clips (2)
downwards.
- Unclip headlining (1) downwards from clips (2) .
- Carefully unclip headlining (1)
from the sliding/tilting sunroof case and clamps and the clamps (3)
in the area of the dotted line.NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
- Guide out the headlining at the respective edge protection.
- Lower the headlining and place it onto the head restraints as shown.