5164 Front Panel, Front End
51 64 FRONT PANEL - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Module bracket, side panel to front panel | I01 | 3.5 Nm | ||
| 2AZ Front panel to holder, rear | I01 | M8x80 | Replace screw. | 28 Nm |
| 3AZ Front panel to support | I01 | 19 Nm | ||
| 4AZ Headlamp support bracket on front panel | I01 | 8 Nm | ||
| 5AZ Front luggage compartment well | I01 | 3 Nm | ||
| 6AZ Lock support to front panel | I01 | 7.6 Nm | ||
| 7AZ Holder, expansion tank to front panel | I01 | M6x20 | 8 Nm | |
| 8AZ Air duct to deformation element | I01 | 4 Nm | ||
| 9AZ Holder, headlight to front panel | I01 | 8 Nm | ||
| 10AZ Stand, radiator, top to strut | I12/I15 | 8 Nm | ||
| 11AZ Cross connection, top to support Front panel |
I12/I15 | 8 Nm | ||
| 12AZ Support, front panel to console | I12/I15 | 8 Nm | ||
| 13AZ Console, front panel console to engine mount | I12/I15 | 8 Nm | ||
| 14AZ Air routing at the front on the cross-member | I12 | 5 Nm |
| Charging power socket holder to front luggage compartment well | ||
| M6 x 16 screw | Tightening torque | 3 Nm |