Removing and installing or replacing window cavity cover strip on outside of left or right front door
Special tools required:
- 00 9 324
IMPORTANT:
Disassembly of the window channel strip is not possible without destroying it.
Window channel strip must be replaced after removal.
Observe procedure for using special tool 00 9 324.
The "Instructions on installation of window guide seals" serve as the basis for these repair instructions and must be observed without fail.
Window channel strip must be replaced after removal.
Observe procedure for using special tool 00 9 324.
The "Instructions on installation of window guide seals" serve as the basis for these repair instructions and must be observed without fail.
Lever out window channel strip (1) with special tool 00 9 324 beginning from the back.
Remove any clamps (2) from door.
Pull out window channel strip (1) from outside rearview mirror (2) in arrow direction.
Installation note:
Moisten window channel strip (1) before installation with approved lubricant.