51 43 340 Removing and installing/replacing B-pillar trim panel at top on left or right
Pull out door handle (2).
Release screws (1) by approx. 2-3 turns.
Do not fully unscrew screws (1)!
Tightening torque 51 22 5AZ .
Remove door handle (2) in arrow direction.
Release trim (1) from detents (2) in arrow direction.
Feed out trim (1) from safety belt (3) and remove.
Remove screw (1).
Lever out trim panel (2) from clips (3) and clamp (4).
Feed out trim panel (2) from safety belt (5) and remove.
Installation note:
If necessary, replace faulty clips (3) and faulty clamps (4).