41 35 106 Left Rear Quarter Panel Removal And Installation
WARNING:
High-voltage system - mortal hazard
Compliance with the following points is mandatory before beginning work:
Compliance with the following points is mandatory before beginning work:
- DISCONNECT HIGH-VOLTAGE SYSTEM FROM POWER .
- Observe SAFETY INSTRUCTIONS for handling electric vehicles.
NOTE:
Read contents of BODY, GENERAL .
Procedure OBSERVE repair stage 1!
Observe BODY GAP DIMENSIONS REP-REP-RAI0141-4106200 - V.2 .
For stripping and rigging operations, refer to texts on KSD CD (job number 41 35 106).
Procedure OBSERVE repair stage 1!
Observe BODY GAP DIMENSIONS REP-REP-RAI0141-4106200 - V.2 .
For stripping and rigging operations, refer to texts on KSD CD (job number 41 35 106).
Attention:
Do not damage adjoining body parts.
Preliminary work needed:
- Remove rear PANEL .
Loosen screws.
Unclip top panel in arrow direction and remove.
Tightening torque 41 35 2AZ/3AZ .