51 43 002 Removing and installing rear left or right side trim panel
Preliminary work needed:
- Refer to REMOVING DOOR SILL COVER STRIP .
- Refer to REMOVING REAR SEAT .
Detach trim panel (1) from clamps (2) towards inside.
Feed out trim panel (1) toward the bottom from guides in area (3).
Installation note:
Replace faulty clamps (2).
Release expansion rivet (1).
Release trim (2) at clips (3) and remove.
Installation note:
Replace faulty clips (3).
Remove trim (2) with preassembled clips (3).
Detach edge protection (1) in area of side trim panel (3).
Remove screw (2).
Release side trim panel (3) from clips (4).
Feed out side trim panel (3).
Installation note:
Replace faulty clips (4).