3310 Rear Differential
3310 TIGHTENING TORQUE OVERVIEW
| Heat shield to servomotor | ||
| M5x10 | tightening torque | 5 Nm |
| Servomotor on rear differential | ||
| M6 Replace screws. |
tightening torque | 9 Nm |
| Temperature sensor on lid of the M Sport differential rear differential | ||
| M12 | tightening torque | 14 Nm |
| Vibration absorber at rear axle | ||
| M8 Replace screw. |
tightening torque | 28 Nm |
| Vibration absorber on rear axle support | ||
| M12 Replace the screw and clip nut. |
tightening torque | 28 Nm |