(Removing the driver's knee protection airbag module)

WARNING: Airbag unit. 
Danger! Immobilization period-threatening injuries! 

• Before working on the airbag, disconnect the negative battery cable from the battery.
• Airbag unit may only be set down with the cushion (airbag itself) facing upwards.
• For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

WARNING: Pyrotechnic components. 
Danger! Immobilization period-threatening injuries! 

• All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
• Replace any damaged part or ones that have been dropped.
• For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

NOTE: Description is for right component only. The procedure on the left side is identical.

• Unlock plug connection (1) and disconnect.
• Unscrew the nuts (2) and remove the driver's knee protection airbag module (3).

Courtesy of BMW OF NORTH AMERICA, INC.