Remove hydraulic unit
Preliminary work
- Refer to INSTALLING BRAKE PEDAL TENSIONER .
- Refer to DETACHING COOLANT EXPANSION TANKS .
- Disconnect plug connection (1).
- Loosen screw (1).
NOTE:
TECHNICAL INFORMATION
Do not interchange brake lines. If necessary, mark the brake lines before disassembly.
Note various equipment specifications with different line seizure.
Do not bend brake lines.
Close off connecting bores with seal plugs.
Do not interchange brake lines. If necessary, mark the brake lines before disassembly.
Note various equipment specifications with different line seizure.
Do not bend brake lines.
Close off connecting bores with seal plugs.
- Unfasten brake lines.
- Remove hydraulic unit (1).