LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
Z4 sDrive30i
>>
Repair and Diagnosis
>>
Brakes
>>
Mechanical - Hydraulic
>>
Brakes -- Repair (G29)
>>
34 51 Mechanical-Hydraulic Components
>>
34 51 601 Replacing hydraulic unit
>>
Remount hydraulic unit holder
Remount hydraulic unit holder
Courtesy of BMW OF NORTH AMERICA, INC.
Release screws (1) and remove the holder (2).
Courtesy of BMW OF NORTH AMERICA, INC.
Install holder (2).
Replace screws (1).
Parts
: Screws
Insert screws (1) and tighten.
TIGHTENING TORQUE SPECIFICATION
Hydraulic control unit to holder
M6
Replace screws.
tightening torque
8 Nm
Courtesy of BMW OF NORTH AMERICA, INC.