Apply the foil (bent) for the VIN

Clean the surface in area (1) with cleaning agent R2 and allow to dry.

Courtesy of BMW OF NORTH AMERICA, INC.

CONSUMABLE SPECIFICATION

Cleaning agent R2 500 ml 83190417324
Detach the protective film beginning at an edge.
Tap the foil (1) only in the areas (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Position the foil (1) with the line (2) in the center above the VIN and press it on.

Courtesy of BMW OF NORTH AMERICA, INC.
Detach the backing film (1) beginning on one side.
If applicable, rub air bubbles out toward the edge.

Courtesy of BMW OF NORTH AMERICA, INC.