Removing the model inscription at the rear
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
- Mask off the working area with adhesive tape.
- Heat the rear model inscriptions (1)
carefully with a hot air blower and release it from the trunk lid with the special tool 0 496 571 (00 9 327)
.TECHNICAL DATA SPECIFICATION
Heating using hot air blower Surface temperature 40°C... 50°C - Remove the adhesive residues on the tailgate and clean the adhesive area with cleaning agent.CONSUMABLE SPECIFICATION
Cleaning agent R2 500 ml 83190417324