Removing the emblem at the rear
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
- Mask the working area with plastic adhesive tape to avoid paint damage.
- Heat the emblem (1)
carefully with a hot air blower and release it from the adhesive strip with the special tool 0 496 571 (00 9 327)
.TECHNICAL DATA SPECIFICATION
Heating using hot air blower Surface temperature 40°C... 50°C - Carefully lever off the emblem (1)
from the guide pins (2)
and remove.
The emblem (1) must be replaced after disassembly.
- Remove adhesive residue on the tailgate and clean the adhesive area.CONSUMABLE SPECIFICATION
Cleaning agent R2 500 ml 83190417324