Supplying the new parts required

NOTE: TECHNICAL INFORMATION
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE .

Preliminary work

Refer to REMOVING REAR LEFT OR RIGHT WHEEL .
Refer to REMOVING REAR WHEEL ARCH COVER .

Prepare the following new parts (see applicable BMW parts catalogue):
Wheel arch trim on rear side panel (1)

Wheel arch trim on bumper cover (2)

Courtesy of BMW OF NORTH AMERICA, INC.

Supply the following consumables:

Material	Quantity
Cleaning agent R2	1