Install the lower B-pillar trim panel
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Feed in the B-pillar trim panel (2) and position it correctly.
Ensure that the B-pillar trim panel (2) is positioned correctly on the front and back edge protection.
- Clip the B-pillar trim panel (2) into the clips (3).
- Mount the expanding rivets (1).
Follow-up work
- Refer to INSTALLING THE UPPER B-PILLAR TRIM PANEL .
- Refer to INSTALLING THE FRONT DOOR SILL COVER STRIP .
- Refer to INSTALLING THE REAR DOOR SILL COVER STRIP .
- Refer to INSTALLING THE BOTTOM C-PILLAR TRIM PANEL .
- Refer to INSTALLING BACKREST SIDE SECTION .