Install the side trim panel in the footwell at the left A-pillar

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Check the clip (4) for damage.
Replace the faulty clip (4).
Position the side trim panel (3) and engage on clip (4).
Make sure that the side trim panel (3) is correctly fitted against edge protection.
Install the expanding rivet (2).
Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

Side trim panel in footwell on A-pillar
screw	Tightening torque	2.8 Nm

Install hood release lever (1).
Pull the hood release lever (1) to the rear.
Install the locking mechanism (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
Refer to INSTALLING THE FRONT DOOR SILL COVER STRIP .