Install front door trim panel

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .

Protect working area.
Handle tools and components carefully.

Check the clips (1) for damage.
Replace damaged or missing clips (1).
The clips (1) must not be engaged. The disengaged state is shown.

Courtesy of BMW OF NORTH AMERICA, INC.
Install the door trim panel.
Attach the Bowden cable of the door opener (1) on the door lock (3).
Attach the Bowden cable of the door opener (1) on the counter support (2).
Connect connectors (4) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the door trim panel (1) on the window channel strip.
Clip in the door trim panel (1) onto the clips.

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten down screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Door trim panel
screw	Tightening torque	5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screw.

TIGHTENING TORQUE SPECIFICATIONS

Door trim panel
screw	Tightening torque	5 Nm

Mount the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.
The step can be omitted for the G05 security vehicle .
Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Door trim panel
screw	Tightening torque	5 Nm

Mount the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten down screw.

TIGHTENING TORQUE SPECIFICATIONS

Door trim panel
screw	Tightening torque	5 Nm

Mount the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws in the handle recess (G05/G07)

Tighten down screws (2).

TIGHTENING TORQUE SPECIFICATIONS

Door trim panel
screw	Tightening torque	5 Nm

Install cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to MOUNTING MIRROR TRIANGLE COVER .