Installing the supports for the exhaust covers left and right
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Install the bracket (2) together with the exhaust cover.
- Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Exhaust cover holder to bumper panel | ||
| Screw | tightening torque | 3 Nm |
- Mount blind rivet (2) using the special tool 0 496 521 (00 2 230) .
- Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATIONS
| Exhaust cover holder to bumper panel | ||
| Screw | tightening torque | 3 Nm |