Adjust lock striker
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Prerequisite
The screws on lock striker are loosened so far that the lock striker can still be shifted.
NOTE:
TECHNICAL INFORMATION
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For additional information see: BODY DIMENSIONS .
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For additional information see: BODY DIMENSIONS .
- Adjust the lock striker's height such that the door lock does not bump or rub against anything.
- Move lock striker sideways in order to adjust the gap dimension between the door and the adjoining body part.
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Lock striker | ||
|---|---|---|
| screw | Tightening torque | 21 Nm |