Removing clean air pipe and resonator
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
High-voltage system
.
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!
- All work on the high-voltage system may only be carried out by specially trained and technically experienced personnel.
- For additional information see:
- For additional information see:
Preliminary work
- Refer to REMOVING THE ACOUSTIC COVER .
- Refer to REMOVING THE RIGHT TENSION STRUT ON THE SHOCK TOWER .
- Refer to REMOVING THE INTAKE FILTER HOUSING (TENSION STRUT ON SHOCK TOWER REMOVED) .
WARNING:
Hot surfaces
.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
- Unlock and loosen engine ventilation line (1).
- Unlock plug connection (1) and disconnect.
- Unlock plug connection (2) and disconnect.
- Remove cable bracket (3) from the engine ventilation line.
- Detach resonator (1) upwards from the rubber mount.
- Unlock and loosen the clamp (2) on the exhaust turbocharger.
- Unlock and release tank vent line (3).
- Feed out and remove the clean air pipe (4) with resonator (1).