Connecting the connector to the left and right vertical acceleration sensor
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Connecting the connector to the vertical acceleration sensor
NOTE:
The following step(s) must be performed if the listed component(s) is/are installed.
- Fasten the cable at the clips (2).
- Connect connectors (1) and lock.