Removing clean air pipe and resonator

Preliminary work 

• Refer to REMOVING THE ACOUSTIC COVER .
• Refer to REMOVING THE RIGHT TENSION STRUT ON THE SHOCK TOWER .
• Refer to REMOVING THE INTAKE FILTER HOUSING (TENSION STRUT ON SHOCK TOWER REMOVED) .

• Unlock and loosen engine ventilation line (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock plug connection (1) and disconnect.
• Unlock plug connection (2) and disconnect.
• Remove cable bracket (3) from the engine ventilation line.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Detach resonator (1) upwards from the rubber mount.
• Unlock and loosen the clamp (2) on the exhaust turbocharger.
• Unlock and release tank vent line (3).
• Feed out and remove the clean air pipe (4) with resonator (1).

Courtesy of BMW OF NORTH AMERICA, INC.