Installing the center console trim

• Check whether the clamps (1) are present and have damage.

  Damaged or missing clamps (1) must be replaced.

• Check guides (2) for damage and, if necessary, replace the center console trim.

  Courtesy of VOLVO CARS CORPORATION

• Feed in center console trim (1).
• Connect and lock respective connectors.

  Courtesy of VOLVO CARS CORPORATION

• Correctly position center console trim (1) and engage at clamps (2).

  Courtesy of VOLVO CARS CORPORATION

  NOTE: Perform the steps on the right and left side.
• Tighten screws (1) on center console trim (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Center console trim to center console
  Oval-head screw
  	Tightening torque	2.4 Nm

  Courtesy of VOLVO CARS CORPORATION

Follow-up work 

• Refer to INSTALLING THE CARPET ON THE CENTER CONSOLE AT LEFT AND RIGHT SIDES .
• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .