Installing the lower section of the front wall

• Feed in and install the lower section of the front wall (3).
• Tighten nuts (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Firewall lower part on body
  Screw/nut
  	tightening torque	2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Firewall lower part on body
  Screw/nut
  	tightening torque	2.6 Nm

Follow-up work 

• Refer to INSTALLING THE CENTER COWL UPPER PART .
• Refer to INSTALLING THE FRONT HOOD SEAL AT THE REAR .
• Refer to INSTALLING WINDSHIELD PANEL COVER .
• Refer to INSTALLING LEFT AND RIGHT WIPER ARM .
• Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .
• Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .