Installing the exhaust camshaft sensor of cylinder bank 2

• Position exhaust camshaft sensor of cylinder bank 1 (2)  .
• Tighten down screw (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

• Position fuel line (1)  .
• Tighten nut (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

• Push aside the wiring harness in area (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

• Push the wiring harness (1)  to the side.

  Courtesy of BMW OF NORTH AMERICA, INC.

• The plug connection of the exhaust camshaft sensor and the ignition coil can be confused, as they are encoded the same. Observe the cable colors in the wiring diagram  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect plug connection (1)  and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING IGNITION COIL ON CYLINDER 5 .
• Refer to INSTALLING THE LEFT INTAKE SILENCER BRACKET .
• Refer to INSTALLING LEFT INTAKE SILENCER HOUSING .
• Refer to INSTALLING ACOUSTIC COVER .