Installing the trim on the center bumper cover

• Position the trim of the center bumper cover (1)  on the locks (arrows) and install it.

  Courtesy of VOLVO CARS CORPORATION

Follow-up work 

• Refer to INSTALLING THE FRONT OUTER DECORATIVE TRIM ON THE LEFT AND RIGHT (M PACKAGE) .
• Refer to INSTALLING THE ORNAMENTAL GRILLE ON THE CENTER BUMPER COVER (M PACKAGE)  .
• Refer to INSTALLING THE AIR ROUTING TRIM ON THE LEFT AND RIGHT (M PACKAGE) .
• Refer to INSTALLING LEFT AND RIGHT RETAINING FRAME .
• Refer to INSTALLING THE FRONT LIGHT COMBINATION AT THE TOP ON THE LEFT AND RIGHT .
• Refer to INSTALLING THE FRONT BUMPER COVER .
• Refer to PARTIALLY INSTALLING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER ON THE LEFT AND RIGHT .
• Refer to PARTIALLY INSTALLING THE LEFT FRONT AND RIGHT WHEEL ARCH TRIM .
• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .
• Refer to INSTALLING THE FRONT LEFT AND RIGHT WHEELS .
• Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT AND RIGHT .
• Refer to INSTALLING THE FRONT HOOD SEAL .