Installing the fog light

• Feed in and correctly position fog light (2)  .
• Tighten down screws (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Fog light on bumper cover
  Screw	tightening torque	3.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (3)  and lock.

Follow-up work 

• Refer to INSTALLING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER .
• Refer to MOUNTING THE WHEEL .
• Refer to ADJUSTING FOG LIGHTS .