Installing the auxiliary turn signal lamp on the outside rearview mirror

• Add auxiliary turn signal lamps (2) to the lower housing section (3).
• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Auxiliary turn signal lamp to cover cap
  Screw	tightening torque	1.2 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Add lower housing section with auxiliary turn signal lamps to the external mirror.
• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Correctly position the top view camera (3).
• Tighten down screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Top view camera to vehicle exterior mirror
  screw	tightening torque	0.85 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.
• Correctly position the lower housing section on the external mirror.
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Housing to vehicle exterior mirror
  Screw	tightening torque	1.1 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE RETAINING RING ON THE OUTSIDE REARVIEW MIRROR .
• Refer to INSTALLING THE EXTERIOR MIRROR ADJUSTMENT DRIVE .
• Refer to INSTALLING THE PROTECTIVE CAP OF THE EXTERIOR VEHICLE MIRROR .
• Refer to INSTALLING THE MIRROR GLASS .