Remounting the LED module for the daytime running lights

Removing the LED module for the daytime driving lights 

• Loosen screws (1).
• Pull LED module (2) out of headlight.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock connector (1) at LED module (2) and disconnect it.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Installing the LED module for daytime driving lights 

• Check the seal (3) on the LED module (2) for damage and replace as needed.
• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the LED module (2) in the headlight.
• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  LED module of daytime running lights  i i
  Screw	tightening torque	1.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.