Installing the LED turn indicator/daytime running lights on the right

Installing LED turn signal for daytime driving lights 

• Check the seal (3) on the LED turn signal/daytime running lights (2) for damage and replace as needed.
• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the LED turn signal/daytime running lights (2) in the headlight.
• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  LED turn signal on headlight
  screw	Tightening torque	1.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.