Removing the tail light on the left and right side panel
NOTE:
Description is for left component only. Procedure on the right side is identical.
Remove the tail light from the side panel on the left
- Unclip the cover of the water channel (1) in arrow direction.
- Loosen nut (1).
- Loosen screws (1).
- Guide out tail light (2).NOTE: TECHNICAL INFORMATION
Observe the note on unlocking and disconnecting plug connections.
For additional information see: UNLOCKING AND DISCONNECTING DIFFERENT PLUG CONNECTIONS - Unlock the connector (1) on the tail light (2) and disconnect.
Remove the tail light on the right side panel
- Unclip the cover of the water channel (1) in arrow direction.
- Loosen nut (1).
- Loosen screws (1).
- Guide out tail light (2).NOTE: TECHNICAL INFORMATION
Observe the note on unlocking and disconnecting plug connections.
For additional information see: UNLOCKING AND DISCONNECTING DIFFERENT PLUG CONNECTIONS - Unlock the connector (1) on the tail light (2) and disconnect.