Partially installing the front section of the front wheel arch cover on the left and right

NOTE: Description is for left component only. Procedure on the right side is identical.

Partially install the front section of the front wheel arch cover

NOTE: To provide a better overview: Schematic diagram with partially hidden components.

Tighten screws (arrows).

TIGHTENING TORQUES SPECIFICATION

Wheel arch cover
Thermoplastic hexagon screw
	Tightening torque	2.6 Nm
Plastic nut
	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.