Partially installing the door sill trim panel
Precondition
Front door is open.
NOTE:
RISK OF DAMAGE
Mechanical effects.
Paint damage.
Mechanical effects.
Paint damage.
- Mask those working areas at risk with yellow plastic adhesive tape.
- Remove and install heavy or bulky components with the aid of another person/other persons.
- If required, connect relevant connector.
- Correctly position the door sill trim panel (1).
- Engage the door sill trim panel (1) at the detents along the dotted line.
- Tighten all bolts and nuts (arrows).TIGHTENING TORQUE SPECIFICATIONS
Undershield, side Hexagon screw Tightening torque 2.6 Nm Plastic nut Tightening torque 2.6 Nm