Installing air conditioning compressor (engine removed)
- Position the air conditioning compressor (5) .
- Position the spacer sleeve (3) .
- Position the lug (4) .
- Tighten down screws (2)
.TIGHTENING TORQUES SPECIFICATION
Air conditioning compressor to holder/engine M8 tightening torque 22 Nm - Connect plug connection (1) and lock.
- Replace the seals (1)
of the suction and pressure line.
Parts: Seals
- Position the intake pipe (3) .
- Position the pressure line (2) .
- Tighten down screws (1)
.TIGHTENING TORQUES SPECIFICATION
Refrigerant line on air conditioning compressor M8 tightening torque 19 Nm