Securing the positive battery cables to the jump start terminal point

NOTE: RISK OF DAMAGE
Malfunction or failure of the DME.
Grounding points that are not screwed on may lead to malfunction or failure of the DME.

Screw all screw points of the cable ducts on again. Some of the screw points are also grounding points.

NOTE: RISK OF DAMAGE
Improper routing of cables and wiring harnesses.
Trapped, crushed or damaged cables may cause short circuits and malfunctions.

Tighten nuts (1) .

TIGHTENING TORQUE SPECIFICATIONS

Auxiliary terminal for jump starting
Flange nut M8
	Tightening torque	15 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Feed in the cover (2) downwards and install.
The locks (1) must lock audibly.

Courtesy of BMW OF NORTH AMERICA, INC.