LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
X7 xDrive40i
>>
Repair and Diagnosis
>>
General Information
>>
OEM General Information
>>
General Orphan Data (1 Of 2)
>>
Installing the timing case cover on the cylinder head of cylinder bank 2
Installing the timing case cover on the cylinder head of cylinder bank 2
Replace the seal (1).
Courtesy of BMW OF NORTH AMERICA, INC.
Position the timing case cover (2) on the cylinder head.
Tighten down screws (1).
Courtesy of BMW OF NORTH AMERICA, INC.
Timing case cover on cylinder head
M6x20 screw
Tightening torque
9.5Nm
Connect connectors (1) and lock.
NOTE:
The connector (1) must engage audibly.
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.