Torque Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW M3, 2005 BMW M3, 2004 BMW M3, 2003 BMW M3, and 2002 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||||
|---|---|---|---|---|---|
| Actuator-To-Transmission Casing | 18 (25) | ||||
| Clutch Slave Cylinder-To-Clutch Housing/Transmission Case | 16 (22) | ||||
| Center Mount-To-Body | 15 (21) | ||||
| Flexible Disk-To-Propeller Shaft & Transmission Output Flange | |||||
| M10 8.8 Thread | 35 (48) | ||||
| M10 10.9 Thread | 47 (64) | ||||
| M12 10.9 Thread | 85 (115) | ||||
| M14 | 103 (140) | ||||
| Reinforcement Plate-To-Front Axle Support/Engine Carrier | |||||
| Stage 1 | 41(59) | ||||
| Stage 2 | Additional 90° | ||||
| Transmission-To-Engine | |||||
| Hex Screws | |||||
| M8 Thread | 18 (25) | ||||
| M10 Thread | 36 (49) | ||||
| M12 Thread | 55 (74) | ||||
| Screw With Torx Head | |||||
| M8 Thread | 16 (22) | ||||
| M10 Thread | 32 (43) | ||||
| M12 Thread | 53 (72) | ||||
| Transmission Cross Member-To-Body | 31 (42) | ||||
| Transmission Mounts (Rubber)-To-Body | 31 (42) | ||||
| INCH Lbs. (N.m) | |||||
| Actuating Unit/Actuator-To-Transmission Casing (1) | 89 (10) | ||||
| Transmission-To-Engine M6 Thread | 80 (9) | ||||
|
|||||