Installing the side window (protective glass)
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Carefully install the side window (2).
- Put a drop of screw locking agent on the thread of every screw (1) before screwing.
ADHESIVE SPECIFICATIONS
| Screw lock Loctite Stick 243, medium strength | 10 ml, Bottle | 83192210339 |
- Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Side window (protective glass) to the body | ||
|---|---|---|
| Hexagon screw M8x20 | tightening torque | 35 Nm |
Follow-up work
- Refer to INSTALLING TRIM PANEL OF LUGGAGE COMPARTMENT .
- Refer to INSTALLING THE SAFETY PARTITION WALL (REAR SHELF) .
- Refer to INSTALLING D-PILLAR TRIM PANEL .
- Refer to INSTALLING C-PILLAR TRIM PANEL .
- Refer to INSTALLING THE BOTTOM C-PILLAR TRIM PANEL .
- Refer to INSTALLING BACKREST SIDE SECTION .