LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2021 >> X7 xDrive40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Body Equipment - Repair (2 Of 3) -- X5 (G05)) >> 51 23 Hood Latch, Locks >> 51 23 004 Adjusting engine compartment lid catch (all X5 models, 2019-2022) >> Check the gap dimension of the hood

Check the gap dimension of the hood

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: TECHNICAL INFORMATION 
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For additional information see: BODY DIMENSIONS .

Check 

G14367570Courtesy of BMW OF NORTH AMERICA, INC.

Desired state 

Result 

» Gap dimension does not correspond to the secondary service information BODY DIMENSIONS .

Measure