LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2021 >> X7 xDrive40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (General Electrical System - Repair -- X5 (2 Of 2) (G05)) >> 61 35 Control Units, Modules >> 61 35... Notes on ESD protection (Electro Static Discharge) (all X5 models, 2019-2022)

61 35... Notes on ESD protection (Electro Static Discharge) (all X5 models, 2019-2022)

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

NOTE: Electrical components which are particularly sensitive to electrostatic discharge (electronic control units, sensors, etc.) are marked with the ESD warning symbol.
E  -Electro
S  -Static
D  -Discharge

Attention! 

Statically charged persons can discharge themselves when they tap electrical components.

NOTE: Humans can only detect a discharge starting from a level of approx. 3000 V.
The danger threshold for electrical components already starts from a level of approx. 100 V.
G04727627Courtesy of BMW OF NORTH AMERICA, INC.

Example:

Mechatronics control unit.

G04727628Courtesy of BMW OF NORTH AMERICA, INC.
G04727629Courtesy of BMW OF NORTH AMERICA, INC.

Attention!

Do not tap pins and multi-pin connectors directly! 

Only tap the housings of electrical components.

Attention! 

To avoid damaging or destroying electrical components as a result of electrostatic discharge, it is absolutely essential to observe the following instructions:

Personal protective equipment: 

Electrically conducting clothing (high wool content, antistatic shoes required).

These can primarily be identified by the logo on the side.

G05780043Courtesy of BMW OF NORTH AMERICA, INC.