Remove door lock
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING THE MIRROR TRIANGLE COVER .
- Refer to REMOVING FRONT DOOR TRIM PANEL .
- Refer to REMOVING THE EXTERIOR MIRROR ON THE FRONT DOOR .
- Refer to REMOVING THE WINDOW CHANNEL STRIP ON THE OUTSIDE OF THE FRONT DOOR .
- Refer to REMOVING THE PROTECTIVE PLATE ON THE FRONT DOOR .
- Refer to REMOVING FRONT DOOR WINDOW GLASS .
- Refer to REMOVING THE POWER WINDOWS OF THE FRONT DOOR .
- Refer to REMOVING THE REINFORCEMENT STRUT OF THE FRONT DOOR .
- Refer to REMOVING THE PROTECTIVE PLATE FOR THE OUTSIDE DOOR HANDLE SUPPORT AT THE FRONT .
- Refer to REMOVE THE FRONT OUTSIDE DOOR HANDLE .
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Loosen screw (1).
- Remove the attachment hood (2).
- Slacken screw (1).
- Carefully lead the Bowden cable (1) and the wiring harness (2) past the protective plate (3) and guide it out.
- Variant with soft-close function for doors:
Unlock and disconnect the plug connection at the soft-close motor (1).
Release the soft-close motor (1) from the door.
- Unclip locking rod (1).
- Disconnect the plug connection on the inside from the door lock (3).
- Unclip the wiring harness from the door lock (3) on the inside.
- Loosen screws (2) and (4).
- Guide out the door lock (3) together with the outer door handle support.
- Detach the linkage (1) from the door lock (2).
- Detach the Bowden cable (1).
- Detach the Bowden cable nipple (2).