Removing the rear emblem
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
- Mask off the working area with plastic adhesive tape to prevent paintwork damage.
- Heat the emblem (1) carefully with a hot air blower and release it from the adhesive strip with the special tool 0 496 571 (00 9 327) .
TECHNICAL DATA SPECIFICATIONS
| Heating using hot air blower | |
|---|---|
| Surface temperature | 40°C... 50°C |
- Lever out the emblem (1) carefully from the grommets (2) and remove.
Emblem (1) must be replaced after removal.