Installing the front emblem
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the adhesive residue on the hood and clean the adhesive area.
CONSUMABLE SPECIFICATIONS
| Cleaning agent R2 | 500 ml | 83190417324 |
- Replace the emblem.
Parts: Emblem
- Check the guide pins (1) of the emblem for damage.
- Check the nozzles (2) for damage, if necessary replace the nozzles (2).
- Coat the guide pins (2) of the emblem (1) with lubricant.
INSTALLATION AID
| Lubricants G14 | 900 ml, Can | 83232360412 |
- Detach the liner from the bonding surfaces of the emblem (1).
- Insert the emblem (1) with the guide pins (2) in the nozzles and press on at all sides.